Tankless Water Heater Maintenance

Performing routine maintenance on your tankless water heater is essential to keep it operating smoothly and efficiently. You can read about the steps to perform descaling and cleaning, as well as the Anode rod and Flushing. Performing regular maintenance will also prolong the life of your heater. Here are some tips to follow:

Descaling

Cleaning your water heater is easy. A descale water heater cleans it of deposits that form in hard water. To clean your water heater, you can buy a cleaning kit. This kit includes everything you need to clean the system, including step-by-step instructions. The cleaning kit comes with a tankless isolation valve and 6-foot hoses. Descale water heaters are important because they remove deposits that can lead to water damage and waterborne illness.

Cleaning the in-line screen

Maintaining a tankless water heater requires regular cleaning of its in-line water filter. To clean the in-line water filter, turn off the water supply to the tankless water heater and unscrew the screen plug. Rinse the filter thoroughly with water, and replace it. If you are not comfortable doing the maintenance yourself, consult a qualified technician. If you are not sure of the necessary steps, here are some tips for performing the maintenance:

Flushing

One of the most important steps in performing regular tankless water heater maintenance is flushing the heater. Because the water passages in a tankless water heater are narrow, it is essential to clean the filter regularly. If you notice lime scale buildup, it is a good idea to flush the heater regularly. To flush a tankless water heater, turn off the incoming water supply, unplug the filter, and clean it thoroughly. Once the filter has been cleaned, reinstall it.

Anode rod

If your tankless water heater is old, you may need to replace the anode rod. This piece is fragile, and if not handled carefully, it can break or become sediment. When it is time to replace the anode rod, the best thing to do is to flush the tank completely. Downey Plumber If the tank is full, leave the drain valve open. After flushing the tank, remove any sediment.

Temperature and pressure relief valve

When maintaining a tankless water heater, you should check the temperature and pressure relief valve. This valve is installed near the water heater, close to where it is most accessible, and it must be connected to the proper drain. You can test the valve by following these steps. When testing the valve, make sure it is rated for 150 psi. The discharge line should be strong enough to handle the pressure, and not exceed its maximum length. Pressure relief valves should be checked and replaced on an annual basis. They are inexpensive and easy to replace.